Product Price: Get Latest PriceThe ETP/STP agitators is used to reduce the emission from chimney and it is to be fabricated using MS sheet of 3mm thick, painted with red oxide one coat and epoxy painting two coats above that. The entire fabricated sheets will be fully welded on both sides, checked for leak and alkaline scrubbing liquid. After erection the entire out side area of the scrubber, duct, bend, flanges, wall support and ground support will be painted with Aluminum color
Product Price: Get Latest Price
Clarifier mechanism is an equipment used for clarification of effluent as primary treatment (after flocculation) or as secondary treatment (after aeration). It is usually installed in a circular tank. It consists of a central shaft connected to a gearbox-motor on one side and a rake mechanism on the other side. The clearance of the tank bottom with the rake mechanism is such that all the sludge is pushed towards the sludge sump at the centre. The motor for the mechanism is mounted on a bridge. The clarifier mechanism could be centrally driven or peripherally driven as required. We have our in-house workshop where we manufacture mechanisms of up to 40 m Diameter.
Product Price: Get Latest Pricean aerating device for sewage and industrial waste water treatments; a membrane with fine pores, through which fine bubbles are generated by the supply of air through blowers